cımō Helmet Mount
PN:310068
Used to mount cımō Device onto hard hat.
cımō Helmet Mount
cımō Accessory Clip (310045) Optional
Usage
The cımō Helmet Mount allows for easy mounting, dismounting, and adjustment of the cımō Device and the cımō Accessory Clip.
Note: The cımō Helmet Mount is not suitable for use with some full-brim hard hats.
Specifications
Weight
11g
Size
43mm x 30mm x 25mm
Material
PC, double-sided adhesive
Instructions
Usage Option #1: Using with cımō Device
- Adhere the base onto the side of the hard hat with either a horizontal or vertical orientation by completing the following steps:
- Clean the application surface with water or alcohol (do not use chemicals/cleaners)
- Remove protective film from the adhesive
- Press the base firmly against the hard hat for 5 seconds
- The adhesive requires 72 hours to fully set
- Attach the cımō Device to the Helmet Mount on the hard hat
- Adjust the knob on the base to tighten and stabilize cımō Device, while allowing free angle movement
Usage Option #2: Using with cımō Accessory Clip
- Adhere the base onto the side of the hard hat with either a horizontal or vertical orientation by completing the following steps:
- Clean the application surface with water or alcohol (do not use chemicals/cleaners)
- Remove protective film from the adhesive
- Press the base firmly against the hard hat for 5 seconds
- The adhesive requires 72 hours to fully set
- Attach the cımō Accessory Clip to the Helmet Mount
- Insert the appropriate accessory into the Accessory Clip
Specifications
Weight
11g
Size
43mm x 30mm x 25mm
Material
PC, double-sided adhesive
Instructions
Usage Option #1: Using with cımō Device
- Adhere the base onto the side of the hard hat with either a horizontal or vertical orientation by completing the following steps:
- Clean the application surface with water or alcohol (do not use chemicals/cleaners)
- Remove protective film from the adhesive
- Press the base firmly against the hard hat for 5 seconds
- The adhesive requires 72 hours to fully set
- Attach the cımō Device to the Helmet Mount on the hard hat
- Adjust the knob on the base to tighten and stabilize cımō Device, while allowing free angle movement
Usage Option #2: Using with cımō Accessory Clip
- Adhere the base onto the side of the hard hat with either a horizontal or vertical orientation by completing the following steps:
- Clean the application surface with water or alcohol (do not use chemicals/cleaners)
- Remove protective film from the adhesive
- Press the base firmly against the hard hat for 5 seconds
- The adhesive requires 72 hours to fully set
- Attach the cımō Accessory Clip to the Helmet Mount
- Insert the appropriate accessory into the Accessory Clip
